Address:Weisi East Rd, Jinshui Dist, Zhengzhou, Henan, China
Hydraulic filter press operation and maintenance matters
1, The filter cloth should be installed smoothly, not fold, to prevent damage to the frame and leak when pressed.
2, Operating pressure of hydraulic station shall not exceed 20Mpa for filter plate.
3, The filtering pressure must be less than 0.45Mpa, filtering temperature must be less than 80 ℃, to prevent causing leakage and frame deformation and tearing.
4, Controlling device of the overflow valve, need adjust to the minimum working pressure in order to make the piston return.
5, When the plate and frame moving on beam, shall not collision, beat, the force should be balanced to prevent damage to the sealing surface and damage the handle.
6, The material, compress, lotion or hot water valve must be enabled in accordance with operating procedures, not both be enabled.
7, When cleaning plate or filter cloth after cake discharging, you should ensure the smooth flow channel, does not allow the residue paste in the sealing surface or the feed channel.
8, When the hydraulic system to stop manipulating, pole hand wheel operation of the apparatus should be normally open, short lever hand wheel should be normally closed, to ensure operation safety and to prevent the oil waste.